You are using the new UI (Beta).Return to the original UI

This page has been automatically translated by machine translation. Please note that translations may not be entirely accurate.

keisanHigh-precision calculations for everyday life and work
Login|Register

Weldable Plate Thickness Range - PLATES-WELDABLE-THICK

Author: hirocherry7312Executions: 1014
TOP/Shared Formulas (Engineering)/Civil & Mechanical

※ This library was created by a member. This site is not responsible for its content.

Manage Bookmarks
Butt welding (excluding T-joints) is permissible when the difference in thickness between the base materials b does not exceed 5 mm. Alternatively, a single-sided bevel with a slope of 1/5 or less must be machined on the narrower end of the thicker plate.
[110,325] PLATES-WELDABLE-THICKNESS=DEFFERENCE
ΔT=T2-T1
As shown in the sketch, left: Acceptable 1 (Δ = 36 – 32 = 4 < 5), Acceptable 2 (2 × Δ = 36 – 19 = 6, distribution), Acceptable 3 (T2 short end = T1 = 25, slope = (7 = 32 – 25)/slope tail 36 > 1/5); Right: Ineligible 1 (Δ = 36 - 19 = 7 > 5), Ineligible 2 (slope = 1/5, T2 short end - T1 = 5)
T2
mm
T1
mm
ΔT mm

No customer feedback for this calculation yet.