Correction Factors for Steel Tape Measures and Temperature - MEASURING-RELAIABL
Author: hirocherry7312Executions: 431
※ This library was created by a member. This site is not responsible for its content.
The correction factor dx for a steel tape measure in response to temperature changes has an error as shown in the figure below.
As a rough estimate, there is a change of 1 mm for every 10°C over a 10-meter span.
As a rough estimate, there is a change of 1 mm for every 10°C over a 10-meter span.
| dx | mm |
No customer feedback for this calculation yet.
[325,725] MEASURING-RELAIABLE-LENGTH=TEMPERATURE
dx = 0.000012 × (T - T0) × L