Calculation of Equivalent Spring Constants (up to 10)
Author: shiroeExecutions: 216
※ This library was created by a member. This site is not responsible for its content.
Here, for each individual spring, if the spring constant is 0, the extension is considered to be 0.
(Springs with a spring constant of 0 are considered to be “absent” from the assembly.
Calculations are performed for the number of assemblies where the spring constant is not 0.)
Enter the spring constants k1 through k10.
The equivalent spring constants for series and parallel connections will be calculated.
Enter values of 0 or greater for k1 through k10.
(If you enter a negative value, the spring will contract
when a force is applied to stretch it.)
When the spring constants of all individual springs in a connection are 0,
the equivalent spring constant will be output as 0.
(Springs with a spring constant of 0 are considered to be “absent” from the assembly.
Calculations are performed for the number of assemblies where the spring constant is not 0.)
Enter the spring constants k1 through k10.
The equivalent spring constants for series and parallel connections will be calculated.
Enter values of 0 or greater for k1 through k10.
(If you enter a negative value, the spring will contract
when a force is applied to stretch it.)
When the spring constants of all individual springs in a connection are 0,
the equivalent spring constant will be output as 0.
| In the case of series connection | N/m |
| In the case of parallel connections | N/m |
Digit display setting: 50 digits. Fixed digits. Complex number calculation mode.
★You can also enter complex numbers in this format. In that case, please
pay attention to whether the imaginary unit is present in the output field.
★Do not leave any fields blank; if the number of springs is less than 10,
please leave the default value of 0.
★You can also enter complex numbers in this format. In that case, please
pay attention to whether the imaginary unit is present in the output field.
★Do not leave any fields blank; if the number of springs is less than 10,
please leave the default value of 0.
No customer feedback for this calculation yet.
It assumes the springs are connected in either a series or parallel configuration.
It can handle up to 10 connected springs.