Stress Intensity Factor Calculation (Finite Flat Plate with a Single-Sided Crack)
Author: gakki0121Executions: 6
※ This library was created by a member. This site is not responsible for its content.
This corresponds to the state shown in Figure 6 of https://www.fem-vandv.net/a15.html.
Please enter the values while referring to the figure to ensure accuracy (e.g., whether it is half the crack width or the full crack width).
Please enter the values while referring to the figure to ensure accuracy (e.g., whether it is half the crack width or the full crack width).
| Stress Intensity Factor K | N/mm^1.5 |
| Stress Intensity Factor K | MPa·m⁰.⁵ |
K = F × σ × √(πa)
F = 1.12 - 0.23 * (a/W) + 10.6 * (a/W)² - 21.7 * (a/W)³ + 30.4 * (a/W)⁴;
σ: Tensile stress
a: Crack depth
W: Plate width
K: Stress intensity factor
F: Correction factor
F = 1.12 - 0.23 * (a/W) + 10.6 * (a/W)² - 21.7 * (a/W)³ + 30.4 * (a/W)⁴;
σ: Tensile stress
a: Crack depth
W: Plate width
K: Stress intensity factor
F: Correction factor
No customer feedback for this calculation yet.
(Finite Plate with a Single-Sided Crack)